Why The Ghost Immobiliser Problems Is Beneficial For COVID-19

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This then authorizes the vehicle to start.

Simple PIN code Change Process

With the rising rate of vehicle theft, many owners are looking to upgrade their security. There are many kinds of security gadgets that are sold aftermarket that range rover vogue ghost installer from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system can assist you in locating your car in the event of theft, it will not stop the crime from happening in the first in the first place. Immobilisers, on the contrary are exactly what they state on the tin - they shut off your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to steal your car.

The ghost immobiliser review device uses the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be accomplished by using the heater, window or indicator stalk buttons. In addition to this option, there is an app for mobile devices that can function as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is a great option if you want to give your car to valet parking or for servicing. The immobiliser remains in operation.

The Ghost is a truly unique and ingenious device that works in conjunction with the buttons in your vehicle rather than being a standalone device. It's not just an effective deterrent for vehicle theft and vandalism, but it can also be used on any future vehicles you may own. This makes it a better investment than a traditional wheel lock.

Small, weatherproof device

The autowatch ghost immobiliser cost ferrari ghost installer immobiliser is a high-tech security system that guards your car from key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a common technique used by thieves to bypass existing immobilisers.

The advantage of CAN data over conventional systems is that they operate silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch ghost does not produce LED indicators and instead uses the buttons inside your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. The sequence can be extended by 20 presses for extra security. The iPhone app is limited to one connection, with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) to allow you to give your car to a valet service or to be serviced without needing to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting up normally until you enter a custom code. The system can be activated and deactivated using your own smartphone app without the need for additional wires.

The standard factory immobilisers function by using a transponder, which is embedded in the key. This transmits a signal to the ECU. The car will start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser will not recognise it. This enables the vehicle to start and be stolen. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It shields your vehicle from hacking, key cloning and even key theft. The only way that a burglar could take your car is physically towing it away and even then, they would not be capable of driving it.

ghost alarm installation uses buttons on your vehicle, including the indicator stalk, the steering wheel, as well as the door panels, to create an individual PIN code that must be entered in order to use your car. This is not required to use extra hardware such as keys-fobs, and can be up to 20 presses long. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code grabbing techniques to discover that a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is hidden within the vehicle so it can't be removed or disabled by thieves and is also harder to remove than a car alarm that requires disarming using an action sequence. This makes it a great alternative to an GPS tracking device, which can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to go far on social media to see stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle with the original keys.

Our Ghost immobiliser is designed to stop this and provide you with an additional layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating an individual pin code push sequence from your buttons on the steering wheel, door panel and centre console. The unique pin code is entered along with your original key fob in order to prevent the engine from beginning. The unique override pin can be found on a black plastic card which you will receive following your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wires and doesn't emit any radio signals, so it cannot be identified by modern criminals using diagnostic software that can detect the type of security system you have installed. This makes it an excellent alternative to an alarm.

Contrary to most security systems that use a relay in the engine bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to block a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems but this must be stated prior to the installation of the device. They are also compatible with valet/service modes and is a great alternative to a tracking device if you take your car to the dealer for an electrical issue.

Service/Valet mode

In recent times, there has seen an increase in the number of cars being stolen from owners without keys. With easy access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your pride and joy. We've developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if your keys have been cloned.

It communicates directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequencies or key fobs. This means it isn't detected by diagnostics or other vehicle hacking devices. It also stops you from introducing an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden inside your vehicle and is reached via the buttons on your steering wheel, centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits has to be entered before you can start your car.

This is the very first aftermarket CAN bus immobiliser that is being developed. It will prevent your vehicle from being driven or even started if you don't enter a PIN code before entering. If you are driving away with the device arming the indicator will flash on your dashboard that will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate normally. If you do not enter your PIN at this point the indicator will continue to flash and will require a new pin code each time you attempt to start your vehicle.