The Ugly Truth About Double Glazing Lock Repairs

Double Glazing Lock Repairs

The use of high-quality locks on your windows and doors helps to prevent burglars from accessing your home. In general, they don't enjoy breaking glass or trying to wiggle through open windows.

However, some double-glazing owners have had problems with their door or window lock after it was installed. These issues can be resolved without the need for a new double glazed window repair (simply click for source) glazing.

Broken or Faulty Locks

If your uPVC window or door lock is broken or faulty, then a locksmith can fix it for you. They can repair double glazing hinges, striker plate and locks for your double-glazing. They can also move the cylinder around to fix any misalignment issues that may be causing your handle to not operate properly.

If the key fits into the lock but it won't turn or is difficult to insert then the mechanism may be seized up. Dirt or grease can be trapped in the mechanism. If this is the case, it is possible to clean the lock and lubricate it. It is essential to make use of a dry lubricant such as teflon or graphite, rather than oil, which can attract dirt and stick to the inside of the mechanism. After lubricating the lock you must insert the key and then try to turn it. The lubricant should work its way into the mechanism and the lock should turn smoothly.

The loose screws inside the lock mechanism are a different reason for a malfunctioning lock. They may loosen and fall out or break completely and stop the lock from working properly. A screwdriver can be used to tighten these screws but caution must be taken not to tighten them too much, since this could cause damage to the internal components.

A faulty lock is dangerous for your family and you. This is especially true if you have small children. It can be easy for them to open the door without knowing and allow them access to your home. If you're concerned that this could happen, a vetted professional locksmith can help secure the double-glazed doors.

Misty Glaze are a professional uPVC and double glaze repair glazing company in Lancing and can repair all types of faulty and damaged mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular needs, which means that in most cases, replacement windows and doors are not required.

Handles that are damaged or broken

As part of their overall security plan, most double glazing window repairs-glazed windows feature a multipoint lock. This is an excellent option for those worried about opportunistic thieves looking for ways to gain access to your home. Ask your installer about antilift blocks. They can be put in alongside your existing locks and will ensure that your windows are securely shut.

It's not uncommon for handle locks to get damaged or even fail - they are the first component of your window to be pushed open by criminals intent on breaking in. The good news is, this is among the easiest parts to repair.

Modern uPVC handles and aluminium handles come with a multi-point locking mechanism known as Espagnolette which is designed to prevent forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional option on double-glazed window installations.

It is essential to fix the handle as soon as possible after it has been damaged. A damaged handle can stop the window from closing properly and also allowing drafts to enter. It can also be a flaw that thieves who are opportunistic could take advantage of, putting your family's belongings and you at risk.

The process of repairing the failed mechanism starts with getting access to the window frame and removing the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be sourced which matches the profile of the internal window frame mechanism.

After the mechanism is replaced the handle can be reattached using the original screws. However, we suggest replacing them with longer screws as they will provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further corrosion. After this step is completed your window will be functioning again at a fraction the cost of replacing it.

Hinges that are broken or Faulty

If your windows do not close properly, you may be experiencing draughts, an affliction of your home's security and an increased risk of damp or water damage. Broken or damaged window hinges are a common problem that can be fixed easily.

If your uPVC windows won't close or open it's likely that the hinges require to be repaired or replaced. Most window companies will require that you purchase an entirely new window unit in order to address this issue, but we are able to replace the hinges in order to save you money.

Window hinges can be damaged by repeated use or weakened over time by corrosion. In the event of a damaged hinge, it's crucial to take precautions to avoid further damage by being careful not to push the window open or closed.

You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are all window hinges. It's best to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

Faulty hinges can be a huge problem for your uPVC window and doors. They can be a significant source of noise and can also allow water to infiltrate which could damage your windows.

Make sure that the pin barrels on both sides of the hinge are aligned. If not, tap the head pin using a hammer to make an arc in the hinge barrel. This will help keep the pin in the right position. Have a person hold the doors as you take off hinge screws and hinges. Replace the hinges with those of a matching size and attach the screws using glue. When the glue is drying, secure the hinges with clamps or weights.

After you have fixed your hinges, you are able to reinstall the door. You can also reattach the handle. Replace the screws with wooden dowels of the same length as the original screw to ensure that they match.

Glass that is broken or Faulty

While uPVC windows do an excellent job of keeping cold out and the heat in, they can become damaged over time. This can include broken or damaged glass and faulty locks. This is an issue that could be extremely costly when not addressed. This can also detract from the aesthetics of your home and result in a decrease in insulation. It is important to repair any damage promptly.

If the glass is broken but isn't shattered it is possible to fix it yourself using the appropriate tools and techniques. Be sure that the area surrounding the broken glass is clear of debris, so that fragments don't cause injury or trip hazards. Next, remove any broken pieces and dispose of them in a safe manner. Apply masking tape over the entire area. This will stop glass shards from sticking to your skin and scattering when you move them. Pre-fitting the glass pane before adhering it to the wall is an ideal option when you have a window that has two panes. This will ensure that you have enough room to finish your project.

Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the curing and application instructions that differ from product to product. Based on the direction of the crack, you may want to hold the glass to hold it in place during curing. This can be done using lightweight clamps designed to hold delicate materials.

When the adhesive has completely cured, carefully reinstall the glass in the window frame, making sure it's flush with the edges of the frame and there are no gaps between the glass and the window sash. Be careful not to bend the glass when you install it again in order to weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that is broken completely or has bigger cracks, contact an experienced professional glazier such as O'Brien(r) to organise an exchange. It's essential to act swiftly in the event of broken glass.