Repairs To Upvc Windows: 11 Thing You're Not Doing

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance, you will need to source some plastic spacers to help the new pane to fit correctly into the window frame.

If you're planning to attempt to remove the window panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws until they remain in the right place.

If you can't reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. Often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window repair near me leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges will wear out over time. Changing a window hinge is essentially a simple procedure, but it is easier to do if you have someone to assist in holding the frame up.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you suggestions.

It is also important to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again due to wear and tear can become misaligned, this can cause an opening to appear where the sash joins the frame. They can be repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is located on the hinge side of the window, can also be misaligned, and again it's possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window repairs seals. These can become worn down or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually get worn out and it is cheaper to replace them than to repair them. So, if you are experiencing issues with your upvc window repairs near me windows, it is recommended to seek assistance from a professional immediately.