16 Must-Follow Pages On Facebook For Patio Door Lock Repair Marketers

Patio Door Lock Repairs

Over time, patio doors experience wear and tear that could cause locks that fail. There are fortunately, a number of simple and effective methods that can restore your uPVC patio doors repair door's security.

These easy fixes will ensure your home is secure regardless of whether you re-align the lock or clean the mechanism.

Clean the Lock

While patio doors are a great way to let in the outside and keep the elements out but they can also pose an issue for security if your lock isn't working as it should. Over time, wear, tear, hot and cold weather dirt and debris can cause your patio door lock to become difficult to operate. Fortunately, with a little maintenance you can make sure that your patio door repair company door's locks always work properly.

In the beginning, it's essential to clean the lock on your patio door and all its moving parts. This will help to remove any coatings or dirt that might be hindering the lock from working properly. Start by wiping down the moving parts of the lock for your patio door using a damp cloth. then employ a scouring pad or rough damp cloth to scrub any hard-to-reach areas of the door and frame that are coated with dirt. Then, wipe the lock down using a dry towel to remove any remaining moisture. Allow it to air-dry before using it.

If your patio door is equipped with pin-tumbler locks, you can apply powdered graphite to the key. You can also apply a Teflon oil like WD-40 Multi Use Product. This type of lubricant is easy to apply and it doesn't dissolve as time passes. If you're not able to find the right lubricant for your needs You might use a pencil with an extremely sharp tip. Place the pencil into the lock, and shake it to distribute the graphite.

Regular maintenance is also essential to keep the tracks of sliding patio doors free from dirt, dust and other debris. These tracks are especially susceptible to snow and ice which can cause them to jam or bind and make it difficult for your patio doors to open and close.

Sliding patio door track rails and rollers can be cleaned by removing any dirty or damaged weather stripping and cleaning them before reinstalling it. Patio door rollers can also be cleaned and sprayed with a nonstick lubricant.

Lubricate the moving parts

uPVC french doors, like sliding patio doors, operate using 3 to 4 or sometimes five-point locking mechanisms, which include the lock cylinder and handle operated by keys. They require maintenance and lubrication of the moving parts. This can be done using an oil that is thin however, never WD40. This should be done at least once a year.

If sagging hinges aren't a cause, the door could be skewed and catch or hitting the strike plate hole within the frame. The solution is to remove the strike plate and then use an abrasive chisel, which will enlarge the mortise that it rests in. This allows the latch to sit perfectly in the hole, and also prevents scratching or catching on the frame.

Once the cylinder is cleared of the way take a measurement of its width using a book or piece of wood that can fit into the gap of adjustment screw above the lock. The outer dimension is measured from the outside of door to the center of cylinder. The inner dimension is measured from the center adjustment screw until the end of the cylinder.

Check the width of the lock.

If your patio door latch is hard to turn, even after oiling and cleaning it could be because it's not aligned properly with the strike plate. Examine if the door is in balance and if the hinge screws are secure however, in many instances it is possible to move the strike plate up or down can fix the issue.

The latch may not be able to engage properly if the strike of the lock is too small. In this situation, you'll need to enlarge the hole using a chisel or hammer and then test the latch to ensure that it contacts the strike plate without rubbing against or landing on the frame of the door jamb.

You should identify the type mortise lock you have before purchasing the replacement. This can be done by looking at the faceplate on the lock and determining whether it is square or round. Then, take a look at the screw holes in the existing lock and note the dimensions of each. This information will aid you in finding an alternative lock that is the same width and fits perfectly into the hole you have already.

In addition to identifying the mortise lock that is currently in use, you'll also want to inspect it for any scratches or bends that might require repair. A bent or damaged latch is more prone to break than one that's not used much, so be sure to replace the lock with a brand new one that is secure if you find any signs of damage or wear.

Once you've decided on the kind of lock replacement you require, it's now time to start the actual repair. The old handle and spindle should be removed from the doorway to the patio. Install the new handle. Begin by installing the interior handle. Align it with the spindle, and then secure it into place using the two screws or bolts. Once the interior handle is in, install the handle on the outside and screw it into the position as well. Once you've completed these steps then you can test the new handles to ensure they open and close easily and that the latch is catching properly with the strike plate.

Make sure the door's strike is checked

The door latch and strike plate are the two components of the lock that work together to ensure that the latch is secure the door. If these parts aren't aligned correctly and the latch isn't latching the door shut properly. Fortunately, this problem is usually simple to fix.

Examine the holes that receive the strike plate to ensure they are free of obstructions like dirt or plastic plugs. Then loosen the keeper screws that hold the strike plate in place, allowing it to move vertically but not separating it from the door frame. Then, adjust the strike plate to ensure that its holes for receiving are aligned with the latch hooks on the door latch. Once the strike plate is adjusted, tighten all screws and check if the door closes smoothly.

These plates are difficult to reach for homeowners with sliding patio door lock repair patio doors. However they are crucial to lock and unlock your door. The metal plates are typically placed on the top and bottom of the door jamb which is where they are used to support the door's latch. Then, the door latch is placed on the strike plate, creating a seal when closed. If the strike plate has been damaged or rusted or not installed correctly the latch may not lock the door properly.

A misalignment between the strike plate and latch is one common cause for the patio lock to not close or stick. This can be confirmed using the "lipstick" test. Apply a little lipstick across the edge of the deadbolt, then cover it with masking tape. When you close the door, the lipstick will leave a mark on the tape, indicating you exactly where the latch contacts the strike plate. If the mark is too low or high it is possible to alter the strike plate.

The sliding patio door locks protect your home from intruders, and if they're not working properly, you need to repair the issue quickly. If you follow these steps, you can fix the lock on your patio door and restore its functionality in a matter of minutes.