9 . What Your Parents Taught You About Fiat Panda Key Fob Replacement

Reasons Your fiat doblo key 500 Key Fob Won't Work

A key fob from fiat 500 key not working 500 allows you to easily open doors and start your car. However, there are many reasons the fob could stop functioning. This includes a dead battery or water damage, problems with the receiver modules, and interference.

This listing is for an NEW replacement Fiat Panda Key Fob Replacement Flip Key Remote - like the Ilco brand that must be programmed professionally by a local locksmith (click here to search for a Locksmith Search). It includes lock, unlock, and trunk buttons.

Dead Coin Battery

The most common reason the 500 key fob won't work is a dead battery. Modern key fobs have a limited range of operation, and should be within some feet of the vehicle in order to function. If you are far from your vehicle, and you press the key fob button, the car won't respond and will display the "Key Fob Not Detected" message in the instrument cluster.

If this happens, simply replace the battery in the coin cell (Part number CR2032) by a new one from a reputable brand such as Panasonic, Duracell, or Energizer. You can usually find them at your local hardware store, or online.

After you've replaced the battery of your coin cell, you can test it by standing next to your fiat multipla key 500 and pressing the buttons. The parking lights will flash and the key fob will operate the lock and unlock switches.

If your key fob still isn't working even after replacing the battery, there might be water damage that has prevented it from interacting with the module inside your vehicle. Water damage can happen in a number of ways, ranging from the slightest splash to submerging your fob in salt water at the beach. If you believe your fob was exposed to water, put it in a bag of rice to draw out the moisture. If this doesn't work, you will have to get your fob changed by an auto locksmith or dealer.

Water Damage

While the fob comes with rubber seals to keep water from the chip's electronic circuit, submerging it in the ocean or washing it in a machine can cause water damage. Saltwater can be particularly harmful to the circuit board of the fob that can cause it to short out and eventually end up dying. It's not a good thing to submerge the fob in water however, but don't give it up in the event that you accidentally drop it in water, or fail to remove it from your pants pocket.

Remove the battery first. Before replacing the battery clean the electronic chip with isopropyl or another similar product. Check the fob to verify if it's working. If the key isn't working then it might need to be changed. This is usually handled by a dealer or professional auto locksmith.

If the key is a newer model and was not programmed to your vehicle it is likely to need to be replaced completely. This is an easy process that can be completed by a professional locksmith for automotive use. The locksmith will have to cut the key to match the ignition in your vehicle. The locksmith will also need to reprogram the fob into the car's system. This is a simple and affordable process that can be completed on the same day.

Receiver Module Issues

One of the main reasons your 500 key fob may stop working is that it's simply out of range. The remote's range is of 30 feet, so when you're too far from your car it won't respond to your commands. You can easily fix this by moving the remote closer to your vehicle until it responds.

If you've replaced the battery in your coin (commonly called"button" or "button" or "watch") and your fob doesn't function, it could have an internal circuit board problem. In the majority of cases, reprogramming your fob will fix the issue. You can find the instructions on how to do this on the majority of vehicles by searching YouTube or looking through the owner's manual.

It is possible to replace the metal retaining clips that keep the coin battery in place. If they become loose, it could prevent your coin battery from sitting properly and cause your remote to malfunction.

In rare cases it is possible that the fob will become desync'd with your vehicle due to software issues or hardware issues. This can cause a major issue, but you are able to usually fix it by visiting a local dealer or auto locksmith to reprogram your fob for you. In some cases the software might require reinstallation into your body control modules.

Interference

In addition to a dead coin battery The key fob might not be able to receive or transmit signals due to interference. This could occur if the keyfob is in close proximity to a radio transmitter such as a cell phone or radar detector. The key fob could not function due to a poor connection with the buttons, water damage or damage to the internal chips.

If your key fob suddenly stopped working, or you have tried everything at home to fix it (e.g. It could be a defective 500 receiver module in the event that you've tried replacing the battery, reprogramming, or using a spare key for fiat 500 key fob. The receiver module, which is located beneath the dashboard, is able to pick up radio frequency signals from your key fob. It transforms the signals into electronic commands, which are then translated by the vehicle.

Luckily, there is an easy way to reset every single system on board in your 500, including the fiat key code fob. Disconnect the battery for 15 minutes, removing first the negative cable and then the positive cable. Reconnect the battery. This will eliminate any remaining electrical charge and restart the car's computer system, which could help get your key fob working again. If the problem persists, you should consult an experienced technician. They'll be able determine the exact cause of your problems.